Work characteristics

 

Air-cooled condenser: reliable performance, slightly higher cost than water cooling, high operating pressure, and simplest operation and maintenance installation. Suitable for areas lacking water resources. The air-cooled condenser uses three-eighths "copper pipe and aluminum pips. After the mechanical expansion pipe, the aluminum plate and the copper pipe are tightly attached to the table. The heat exchange efficiency is high. The product undergoes a 2.5MPA pressure test leak detection. The factory leaves and retains 0.05MPA. The pressure of 0.lMPA can be used in refrigerants such as R22, R134A, R404A, etc., and is widely used in various Freon refrigeration equipments. The FNs-type condenser is used to select high-power, high-volume, low-speed motors and it is installed internally. With beautiful appearance and low noise, it can be used in units with relatively low noise. The FNV type condenser has large windward surface and good heat exchange effect. It is equipped with a 6-pole motor with low noise and can be used in larger condensing units. Various types of wind condensers can be designed according to customer requirements.